The new trend is FRUITY! A series of silicone moulds to create juicy fruit-shaped creations with an original 3D effect. With FRUIT INSPIRATIONS you can recreate fresh, juicy and colourful apples, peaches and apricots with a single mould. The cavities of the Ispirazioni di Frutta mould of the 3Design line by Silikomart are equipped with a revolutionary internal border that gives a slight rounded shape to the base of your preparations. Inspirazioni di Frutta guarantees impeccable results not only in the semifreddo and mousse version, but also in the cooked version.
|182mm x 339mm x 52mm, Ø62|
|Vol. Cavity. 118ml|
|Total Vol. 710ml|
||Usable across a temperature range from – 60°C + 230°C.|
||Can be cleaned in the dishwasher|
||Can be taken from the oven/microwave and placed immediately in the fridge freezer and vice versa.|
||If bent, the mould will regain its shape.|
||Mould does not release odour during cooking.|
||All materials used are tested in accordance with the Foods Standards Agency.|
||Materials used conform with EU standards|
You may also see white or coloured spots appear on the mould’s surface, if particular ingredients such as cocoa butter or tomato sauce are used. To eliminate such stains, simply place them in the oven (without any dough) for about one hour at a temperature of 200-220 ° C.
The moulds can go straight into the dishwasher after use. We recommend that you do not use aggressive cleaners, brighteners or perfumers while washing moulds in the dishwasher. This may cause a white patina to surface on the mould, this could alter the food’s flavours. The good news, the safety of the mould is not compromised. Same as above, place the mould in the oven (without any dough) for about one hour at a temperature of 200-220 ° C.
Sharp objects are not to be used with the moulds as this may pierce/damage the mould.